52
CRANKCASE BREATHER
Refer to the Safety Precautions on Page 44.
1. Open the clamp (1) and remove
crankcase breather tube (2) from the
air cleaner and drain deposits into a
suitable container .
2. Periodically clean up breather oil from
breather tube.
3. Reinstall the crankcase breather tube.
Service more frequently when riding in rain,
at full throttle, or after the scooter is washed
or overturned. Service if the deposit level
can be seen in the transparent section of
the drain tube.
3. Remove the air filter (3).
4. Wash the air filter in clean,
nonflammable or high flash point
solvent and let it dry thoroughly.
Never use gasoline or low flash point
solvents for cleaning the secondary air filter.
A fire or explosion could result.
5. Soak the air-cleaner in engine oil
(SAE 20W-40) until saturated, then
squeeze out the excess oil.
6. Install the removed parts in the reverse
order of removal.
(1) Clamp ¼dySEi½
(2) Crankcase breather tube ¼Øsaddsl czhnj V;wc½
(1) Air filter housing cover ¼,;j fQYVj gkmftxa doj½
(2) Screw ¼LØw½ (3) Air filter ¼,;j fQYVj½
(2)
(1)
(3)
(2)
(1)
To Next Page
Loading...
Need help?
General