70
Braking efficiency may be temporarily
impaired immediately after washing the
scooter.
Anticipate longer stopping distance to avoid
a possible accident.
TEST BRAKES
Finishing Touches
After washing your scooter, consider using
a commercially-available spray cleaner/
polish or quality liquid or paste wax to finish
the job. Use only a non-abrasive polish or
wax made specifically for motorcycles or
automobiles. Apply the polish or wax
according to the instructions on the
container.
Removing Road Salt
The salt contained in the road surface
freezing prevention medicine which a road
was sprayed with in winter, and the seawater
becomes the cause which rust occurs in.
Wash your scooter by the following point
after it runs through such a place.
1. Clean the scooter using cool water
(Ref. page 68-70).
Do not use warm water.
This worsens the effect of the salt.
2. Dry the scooter and the surface of the
metal is protected with the wax.
To Next Page
Loading...
Need help?
General