Honda BF250A User Manual

20
CONTROLS AND FEATURES
Turning the ignition switch key to the
START position starts the engine.
The key automatically returns to the
ON position when released from the
START position.
The engine will not start unless the
gearshift/throttle control lever is in
the N (neutral) position (p. 43) and
the emergency stop switch clip is in
the emergency stop switch.
Turning the ignition switch to the
OFF position stops the engine.
Emergency Stop Switch Clip and
Emergency Stop Switch
The emergency stop switch clip must
be inserted in the emergency stop
switch in order for the engine to start
and run. The emergency stop switch
lanyard must be attached securely to
the operator or to the operator’s PFD
(Personal Flotation Device).
When used as described, the
emergency stop switch clip and
emergency stop switch lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip (optional
equipment) can be stored in the tool
bag.
EMERGENCY
STOP SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY
STOP SWITCH
LANYARD
EMERGENCY STOP
SWITCH CLIP
EMERGENCY
STOP SWITCH
LANYARD
SPARE SWITCH CLIP
(optional equipment)
31ZX26040.book Page 20 Friday, July 25, 2014 5:14 PM

Honda BF250A Specifications

General

Brand	Honda
Model	BF250A
Category	Outboard Motor
Language	English