63
SERVICING YOUR OUTBOARD MOTOR
MANUAL RELIEF VALVE
The outboard motor can be tilted
manually after opening the manual
relief valve. This feature enables the
outboard motor to be tilted up or
down when no battery is connected.
For manual tilting, use a screwdriver
to turn the valve counterclockwise 1
or 2 turns. Close the valve firmly
after positioning the outboard motor.
Be sure the valve is closed before
operating the outboard motor. If the
valve is not closed, the outboard
motor will tilt up when operated in
reverse.
ENGINE COVER REMOVAL
AND INSTALLATION
Removal
1. Pull the engine cover latch.
2. Remove the engine cover by lifting
it straight up from the outboard
motor.
Installation
1. Place the engine cover on the main
body.
2. Slide the engine cover so that the
cover lock on the cover aligns with
the lock in the main body.
MANUAL RELIEF VALVE
POWER
(To fix)
MANUAL
(To release)
COVER SIDE
COVER LOCKS
MAIN BODY SIDE
31ZX26040.book Page 63 Friday, July 25, 2014 5:14 PM
To Next Page
Loading...
Need help?
General
