Honda BF250A User Manual

40
OPERATION
STARTING THE ENGINE
Control
Side-Mount Type ....................... P. 40
Panel-Mount Type ..................... P. 43
Top-Mount Type ........................P. 45
Side-Mount Type
1. Put the emergency stop switch clip
in the emergency stop switch, and
attach the emergency stop switch
lanyard securely to the operator or
to the operator’s PFD (Personal
Flotation Device).
The engine will not start or run
unless the emergency stop switch
clip is in the emergency stop
switch.
The emergency stop switch clip
and emergency stop switch lanyard
system is a safety device that will
stop the engine if you fall away
from the controls while operating
the boat.
Always attach the emergency stop
switch lanyard securely to the
operator or to the operator’s PFD
before starting the engine.
2. Set the control lever in the N
(neutral) position.
The engine will not start if the F
(forward) or R (reverse) gears are
engaged.
EMERGENCY
STOP SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY
STOP SWITCH
LANYARD
N (NEUTRAL)
CONTROL
LEVER
31ZX26040.book Page 40 Friday, July 25, 2014 5:14 PM

Honda BF250A Specifications

General

Brand	Honda
Model	BF250A
Category	Outboard Motor
Language	English