29
CONTROLS AND FEATURES
Tachometer
(optional equipment)
The tachometer shows engine speed
in revolutions per minute.
Refer to the tachometer when using
the throttle and power trim/tilt
controls to achieve the best
performance from the boat.
NMEA Interface Coupler
The NMEA2000
®
interface coupler
can provide information regarding
engine speed, fuel consumption, and
various warnings to an existing
NMEA2000 network via an optional
interface cable. Contact your dealer
for more information.
Operating Hour Notification
System
This outboard motor engine counts
the number of operating hours since
the last periodic maintenance. When
the next periodic maintenance is due,
the engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed, reset the hour counter by:
1. Stopping the engine.
2. Setting the gearshift at F or R.
3. Turning the ignition switch ON.
The buzzer will sound once.
4. Pressing the emergency stop switch
5 times within 20 seconds.
The buzzer will sound once when
the hour counter is reset.
31ZX26040.book Page 29 Friday, July 25, 2014 5:14 PM
To Next Page
Loading...
Need help?
General
