Seat
#
Removal
1.
Insert the ignition key into the seat lock,
and turn and hold the key clockwise to
unlock the seat.
2.
Pull the seat back and up.
#
Installation
1.
Insert the prongs into the front and rear
stays on the frame.
2.
Push forward and down on the rear of the
seat until it locks in place. Make sure that
the seat is locked securely in position to
pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
underseat compartment.
20170224170119_32MGC6510_eng_BOOK Page 64 Friday, February 24 2017 17:08:26 JST
Removing & Installing Body Components u Seat
Maintenance
61
Prongs Seat
Rear stays
Front stay
Ignition key
Seat lock
To Next Page
Loading...
Need help?
General
