Engine Will Not Start (HISS indicator stays on)
Starter Motor Operates But
Engine Does Not Start
Check the following items:
● Check the correct engine starting
sequence. 2 P. 35
● Check that there is petrol in the fuel tank.
● Check if the PGM-FI malfunction indicator
lamp (MIL) is on.
u If the indicator light is on, contact your
dealer as soon as possible.
● Check if the HISS indicator stays on.
u Turn the ignition switch to the
(Off)
position and remove the key. Reinsert
the key and turn the ignition switch to
the (On) position. If the indicator still
stays on, check the following:
Check if there is no another HISS
key
(including spare key) close to the
ignition switch.
Check if there are no any metallic seals
or stickers on the key.
If the
HISS indicator still stays on, have
your motorcycle inspected by your
dealer.
Starter Motor Does Not
Operate
Check the following items:
● Check the correct engine starting
sequence. 2 P. 35
● Make sure engine stop switch is in the
(Run) position. 2 P. 32
● Check for a blown fuse. 2 P. 110
●
Check for a loose battery connection or
battery terminal corrosion. 2 P. 48, 2 P. 58
● Check the condition of the battery.
2 P. 106
If the problem continues, have your
motorcycle inspected by your dealer.
20170224170119_32MGC6510_eng_BOOK Page 93 Friday, February 24 2017 17:08:26 JST
Troubleshooting
90
To Next Page
Loading...
Need help?
General
