Low Tire Pressure / Tire Pressure Monitoring System (TPMS)
U.S. models
Comes on and stays on when:
• One or more tires' pressures are determined to be significantly
low.
• The system has not been calibrated.
• Comes on while driving - Stop in a safe place, check tire
pressures, and inflate the tires(s) if necessary.
• Stays on after the tires are inflated to the recommended
pressures - The system needs to be calibrated.
• Blinks for about one minute, and then stays on if there is a
problem with the TPMS, or when a compact spare tire
*1
is
temporarily installed.
• Blinks and remains on - Have your vehicle checked by a dealer. If
the vehicle is fitted with a compact spare, get your regular tire
repaired or replaced and put back on your vehicle as soon as you
can.
• Comes on if the TPMS is deactivated temporarily after the battery
has been disconnected, then re-connected.
• Drive a short distance at more than 12 mph (20 km/h). The
indicator should go off. If it does not, have your vehicle checked
by a dealer.
Vehicle Stability Assist
™
(VSA
®
) System
Comes on if there is a problem with the brake assist system, VSA
®
or
hill start assist system.
• Stays on constantly - Have your vehicle checked by a dealer.
*1 - If equipped
INSTRUMENT PANEL
30 |
Collision Mitigation Braking System
™
(CMBS
™
)
• Stays on constantly without the CMBS
™
off - Have your vehicle
checked by a dealer.
• Comes on if the CMBS
™
is deactivated temporarily after the
battery has been disconnected, then re-connected.
• Drive a short distance at more than 12 mph (20 km/h). The
indicator should go off. If it does not, have your vehicle checked
by a dealer.
• Comes on when the CMBS
™
system shuts itself off.
• Stays on - The area around the camera is blocked by dirt, mud,
etc. Stop your vehicle in a safe place, and wipe it off with a soft
cloth.
• Stays on - The temperature inside the camera is too high. Use the
climate control system to cool down the camera. The system
activates when the temperature inside the camera cools down.
• Indicator may come on temporarily when the Maximum Load Limit
is exceeded.
• Make sure the total load is within the Maximum Load Limit.
• Stays on constantly - Have your vehicle checked by a dealer.
INSTRUMENT PANEL
| 31
To Next Page
Loading...
Need help?
General
