Engine Oil
Park the vehicle on level ground. Wait approximately three minutes after turning
the engine off before you check the oil.
n Checking the Oil
1. Remove the dipstick (orange or black).
2. Wipe the dipstick with a clean cloth or paper towel.
3. Insert the dipstick all the way back into its hole.
4. Remove the dipstick again, and check the level. It should be between the
upper and lower marks.
Add oil if necessary.
Note: Under certain driving conditions, it is normal for the engine oil level to
rise above the upper mark. If you have a concern, consult a dealer for
details.
MAINTENANCE
174 |
n Recommended Engine Oil
• Genuine Honda Motor Oil
• Premium-grade 0W-20 detergent oil with an API Certification Seal on the
container
This seal indicates the oil is energy conserving and that it meets the
American Petroleum Institute’s latest requirements. Use Genuine Honda
Motor Oil or another commercial engine oil of suitable viscosity for the
ambient temperature.
n Adding Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap and tighten it securely.
4. Wait for three minutes and recheck the engine oil dipstick.
Do not fill the engine oil above the upper mark. Overfilling the engine oil may
result in leaks and engine damage.
If any oil spills, wipe it away immediately. Spilled oil may damage the engine
compartment components.
n Resetting the Engine Oil Life
If you change or replace the vehicle’s engine oil yourself, you must reset the
engine oil life.
MAINTENANCE
| 175
To Next Page
Loading...
Need help?
General
