Honda EZ3000CX User Manual

WARNING
Gasoline is highly flammable explosive.You can
be burned or seriously injured when handing fuel.
Keep heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
2-2. FUEL TANK AND FILTER CLEANING
1) Drain the fuel into a suitable container.
2) Turn the fuel valve to the “OFF”
3) Remove the fuel tank.
4) Remove the fuel valve.
5) Check the screen of the fuel valve filter for clogs or damage, replace if necessary.
Clean the fuel valve filter with non-flammable solvent, and allow them to dry thoroughly.
O-ring can not be reused. Replace with new.
OFF Position
Fuel tank cap
Fuel tank filter
Fuel valve filter
Fuel tank
O-ring
Fuel valve nut
20N・m
Fuel valve
INSTALLATION：
Wash to remove the sediment, before
installing.
Always wash with gasoline.
O-ring
Sediment cup
4.5N・m
INSTALLATION：
Before installation, clean the screen
and check for damage.
INSTALLATION：
Before installation, clean the screen
and check for damage.
Replace if necessary.
INSTALLATION：
Before installation, clean the screen
and check for damage.
INSTALLATION：
Check for any leakages
after assembly.
Filter
15

Honda EZ3000CX Specifications

General

Brand	Honda
Model	EZ3000CX
Category	Inverter
Language	English