Honda EZ3000CX User Manual

WARNING
Gasoline is highly flammable explosive.You can
be burned or seriously injured when handing fuel.
Keep heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
3.2.2 FUEL TANK
1) Shut the fuel valve and discharge fuel from
carburetor.
2) Remove rubber pipe from the fuel valve.
3) Remove the fuel tank.
Bolt (M6-25L) (4)
Washer (M6) (4)
Fuel tank cap
Fuel tank filter
Fuel valve filter
Fuel tank
O-ring
Fuel valve nut
20N・m
Fuel valve
INSTALLATION：
Wash to remove the sediment, before
installing.
Always wash with gasoline.
O-ring
Sediment cup
4.5N・m
INSTALLATION：
Before installation, clean the screen
and check for damage.
INSTALLATION：
Before installation, clean the screen
and check for damage.
Replace if necessary.
INSTALLATION：
Before installation, clean the screen
and check for damage.
INSTALLATION：
Check for any leakages
after assembly.
Filter
Washer
Bolt
FUEL TANK
OFF Position
Rubber pipe
29

Honda EZ3000CX Specifications

General

Brand	Honda
Model	EZ3000CX
Category	Inverter
Language	English