3-2. REMOVAL
3.2.1 CONTROL PANEL AND CONTROL BOX
1) Remove the end cover.
Bolt (M5-12L) (2)
2) Remove the wiring from the control
panel to the alternator.
3) Remove the Black wire and White wire
from terminal block.
4) Remove the Green/Yellow wire from
bracket (2).
Bolt (M5-12L) (1)
5) Disconnect the engine wiring.
Wire band Cutting.
Wire band can not be reused.
Replace with new.
6) Remove the control panel.
Bolt (M6-20L) (4)
7) Remove the control box.
To Next Page
Loading...
Need help?
General
