ROCKER ARM SHAFT
INSTALLATION:
Install the rocker arm shaft from the opposite side
of
the cam
pulley as shown.
CYLINDER HEAD COVER
INSTALLATION:
2
3)
Clean the mating surfaces of the cylinder head cover and
the cylinder barrel using a degreasing cleaning agent or a
clean shop towel.
Apply a liquid packing (Three Bond 1207 Honda Bond
#4
or
equivalent) to the cylinder head cover; specifically to the in-
ner wall of the groove and bolt hole in the cylinder head
cover.
NOTE:
Assemble within
10
minutes after applying the liquid
packing.
Wait for approximately 20 minutes after assembly before
filling oil and starting the engine.
ROCKER
ARM
SHAFT
’
CYLINDER HEAD COVER VIEWED
FROM BACK SIDE:
LIQUID PACKING
APPLICATION AREA
To Next Page
Loading...
Need help?
General
