Honda GC190 User Manual

VALVE GUIDE I.D.
Measure and record each valve guide I.D.
I Stahdard I Service limit I
Replace the cylinder barrel if they are over the service limit
0
1)
3)
4)
VALVE SEAT WIDTH
Thoroughly clean the combustion chambers and valve seats
to remove carbon deposits
Apply a light coat of Prussian Blue compound
or erasable
felt-tipped marker ink to the valve faces.
Insert the valves, and then
lift them and snap them closed
against their seats several times. Be sure the valve does not
rotate on the seat. The transfered marking compound will
show any area of the seat that is not concentric.
Measure the valve seat width.
I Standard I Service limit I
If the valve seat width is under the standard, or over the
service limit,
or if the valve seat is too high/low, recondition
the valve seat
VALVE
FACE
VALVE SEAT
TOO LOW
I VALVE SEAT TOO HIGH
gc160_gcaha_3599750_3721672

Honda GC190 Specifications

General

Brand	Honda
Model	GC190
Category	Engine
Language	English