Honda GC190 User Manual

PISTON RING SIDE CLEARANCE
L
Standard
Service limit
1
PISTON RING END GAP
Standard
Service limit
NOTE:
~
Use the top of the piston to position the ring horizontally in
the cylinder.
PISTON PIN O.D.
Standard
Service limit
PISTON PIN BORE I.D.
Standard
Service limit
gc160_gcaha_3599750_3721672

Honda GC190 Specifications

General

Engine Type	4-stroke, overhead cam, single-cylinder
Compression Ratio	8.5:1
Net Torque	8.3 lb-ft (11.3 Nm) at 2, 500 RPM
PTO Shaft Rotation	Counterclockwise (from PTO shaft side)
Ignition System	Transistorized magneto
Starting System	Recoil starter
Lubrication System	Forced splash
Fuel Type	Unleaded gasoline (86 octane or higher)
Displacement	187 cm³
Bore x Stroke	69 mm x 50 mm
Net Power Output	4.8 HP (3.6 kW) @ 3, 600 rpm
Oil Capacity	0.61 US qt (0.58 L)
Air Cleaner	Dual element