EasyManuals Logo

Honda GX240 User Manual

Honda GX240
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
22
SERVICING YOUR ENGINE
MAINTENANCE SAFETY
Safety Precautions
Carbon monoxide poisoning from engine exhaust.
Burns from hot parts.
Injury from moving parts.
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.
Failure to properly follow
maintenance instructions and
precautions can cause you to be
seriously hurt or killed.
Always follow the procedures and
precautions in the owner’s manual.
Remember that your servicing dealer knows your engine best and is
fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, genuine
Honda parts or their equivalents for repair and replacement.
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
Be sure there is adequate ventilation whenever you operate the
engine.
Let the engine and exhaust system cool before touching.
Do not run the engine unless instructed to do so.
Read the instructions before you begin, and make sure you have the
tools and skills required.
To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks and flames away
from all fuel-related parts.
03/08/21 20:09:40 31ZH9613_023

Table of Contents

Other manuals for Honda GX240

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda GX240 and is the answer not in the manual?

Honda GX240 Specifications

General IconGeneral
Compression Ratio8.2:1
PTO Shaft RotationCounterclockwise (from PTO shaft side)
Ignition SystemTransistorized magneto ignition
Fuel SystemCarburetor
Lubrication SystemForced splash
Displacement242 cm³
Net Power Output3, 600 rpm
Net Torque2, 500 rpm
Fuel Tank Capacity5.3 liters
Oil Capacity1.1 liters
Starting SystemRecoil starter
Dry Weight25 kg (55 lbs)
Bore x Stroke73.0 x 58.0 mm (2.9 x 2.3 in)

Related product manuals