27
SERVICING YOUR ENGINE
ENGINE OIL CHANGE
FILLER CAP/
DIPSTICK
DRAIN PLUG
OIL LEVEL
WASHER
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
Place a suitable container below the engine to catch the used oil,
then remove the filler cap/dipstick, drain plug, and washer.
Allow the used oil to drain completely, then reinstall the drain plug,
washer, and tighten drain plug securely.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take used oil in a sealed container
to your local recycling center or service station for reclamation. Do
not throw it in the trash, pour it on the ground, or down a drain.
With the engine in a level position, fill to the outer edge of the oil
filler hole with the recommended oil (see page 28).
Running the engine with a low oil level can cause engine damage.
The Oil Alert system (applicable engine types) will automatically
stop the engine before the oil level falls below the safe limit.
However, to avoid the inconvenience of an unexpected shutdown,
fill to the upper limit, and check the oil level regularly.
Screw in the filler cap/dipstick securely.
1.
2.
3.
4.
5.
03/08/21 20:10:30 31ZH9613_028
To Next Page
Loading...
Need help?
General
