Honda HRM 520 User Manual

Checking the lawnmower / Turning on / off the power
54
5
Connect the transformer plug to a power outlet with the designated voltage.
Power outlet voltage for the EAE, EAEN and EAS types: AC 230 V
Power outlet voltage for the EAB type: AC 240 V
Checking the lawnmower
Before operation, check to make sure that it is connected all the way into the docking station.
The light above the charging plug changes as follows:
Color Description
Green The docking station signal setting is correct.
Green
(blinking)
The boundary wire is too long.
Amber The lawnmower is correctly connected to
the docking station.
Amber
(blinking)
A signal problem—such as the boundary
wire becoming disconnected or cut—has
occurred. Contact your dealer.
Red Contact your dealer.
Off
Conrm the connection with the power cord.
If the docking station is correctly
connected with the power cord, a power
failure has occurred. Contact your dealer.
NOTE:
- If the lawnmower is not correctly connected to the docking station, the battery cannot recharge.
- Do not touch the recharging connector. If you touch it, you may become injured.
Turning on / off the power
Turning on the power
After the battery is charged, press the A (On) button to turn on the lawnmower.
The A (On) button is located on the control panel at the rear side of the lawnmower.
N WARNING
-
Do not insert your nger beneath the closed operation panel cover or height adjustment dial cover.
- When stopping the lawnmower, approach it from the back. Approaching it from the front or
sides may lead to unintended contact with the lawnmower, and you may fall over it when the
lawnmower begins to move.
1
Press the manual STOP button.
The control panel cover pops up.
2
Press the A (On) button on the control panel.
The power turns on, and the startup screen on the control panel is displayed.

Honda HRM 520 Specifications

General

Brand	Honda
Model	HRM 520
Category	Lawn Mower
Language	English