72
Manual mode operation
10
APPENDIX
Operating the lawnmower with the Manual mode
This setting can be used when 2 or more areas within the boundary wire are connected by a narrow path.
If you have 2 or more areas within the boundary wire connected by a path that is less than 1 meter wide,
the lawnmower cannot pass between them, and must be carried to the other area manually. Follow the
steps below when performing this procedure.
Manual mode operation
These instructions can be used to operate the lawnmower for the Manual mode settings.
1
See “Manual Mode” (M page 38) to congure settings for Manual Mode.
2
Press the B (Off) button on the control panel.
The power turns off.
3
Close the control panel cover.
4
Carry the lawnmower to the desired area.
For details on carrying the lawnmower, see “7 MAINTENANCE” (M page 63).
5
Press the manual STOP button.
The control panel cover pops up.
6
Press the A (On) button on the control panel.
The power turns on, and the startup screen on the control panel is displayed.
7
Enter the PIN using the number buttons to display the Home screen.
8
Press the D (Auto / Manual) button repeatedly until
Manual mode screen is displayed.
17:01 Fri
Manual mode
Mow until empty
Mow then recharge
continuously
Mow then resume
auto timer
9
Select an operation of lawnmower.
Items Description
Mow until empty The lawnmower works until battery is empty.
Mow then recharge continuously The lawnmower works and charges until the work timer
is changed to Auto mode by the user.
Mow then resume auto timer The lawnmower works and charges once then switches
automatically to Auto mode and resumes the timer.
To Next Page
Loading...
Need help?
General
