Honda VFR800 ABS User Manual

Disconnect the vacuum tube ( ).
Remove and discard the air cleaner ( ).
Install the removed parts in the reverse
order of removal.
Install a new air cleaner.
Use the Honda Genuine air cleaner or an
equivalent air cleaner specified for your
model. Using the wrong Honda air
cleaner or a non-Honda air cleaner which
is not of equivalent quality may cause
premature engine wear or performance
problems.
Remove the air cleaner housing cover ( )
by removing the screws ( ).
Raise the fuel tank (page ).
The air cleaner should be serviced at
regular intervals (page ). Service more
frequently when riding in unusually wet or
dusty areas.
Refer to the Safety Precautions on page .
1.
2.
3.
4.
5.
6.
(3)
(3)
(4)
(1)
(3)
(2)
1
87
89
2
3
4
67
(1) Vacuum tube
(2) Air cleaner housing cover
(3) Screws
(4) Air cleaner
AIR CLEANER
94
08/08/06 10:09:40 32MCW660_104
Classic Cycles Technical Resources

Honda VFR800 ABS Specifications

General

Displacement	782 cc
Bore x Stroke	72 mm x 48 mm
Compression Ratio	11.8:1
Fuel System	PGM-FI electronic fuel injection
Transmission	6-speed
Final Drive	Chain
Wheelbase	57.4 inches
Engine Type	Liquid-cooled 4-stroke 16-valve DOHC 90° V-4
Rear Brakes	Single 256mm disc with 2-piston caliper and ABS
Front Tire	120/70ZR-17
Rear Tire	180/55ZR-17