Honda VFR800 ABS User Manual

Refer to the Safety Precautions on page .
The light bulb becomes very hot while the
light is ON, and remains hot for a while
afteritisturnedOFF.Besuretoletitcool
down before servicing.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the bulb.
Be sure to turn the ignition switch OFF
when replacing the bulb.
Do not use bulbs other than those
specified.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
After installing a new bulb, check that the
light operates properly.
87
BULB REPLACEMENT
131
08/08/06 10:14:38 32MCW660_141
www.ClassicCycles.org

Honda VFR800 ABS Specifications

General

Displacement	782 cc
Bore x Stroke	72 mm x 48 mm
Compression Ratio	11.8:1
Fuel System	PGM-FI electronic fuel injection
Transmission	6-speed
Final Drive	Chain
Wheelbase	57.4 inches
Engine Type	Liquid-cooled 4-stroke 16-valve DOHC 90° V-4
Rear Brakes	Single 256mm disc with 2-piston caliper and ABS
Front Tire	120/70ZR-17
Rear Tire	180/55ZR-17