Honda VFR800 ABS User Manual

−
−
Running the engine with insufficient oil
pressure may cause serious engine damage.
Check the engine oil level each day before
riding the motorcycle.
The level must be maintained between the
upper( )andlower( )levelmarksinthe
inspection window ( ).
Start the engine and let it idle for 3 5
minutes. Make sure the red low oil
pressure indicator goes off. If the light
remains on, stop the engine immediately.
Stop the engine and put the motorcycle
on its center stand on level ground.
After 2 3 minutes, check that the oil
level is between the upper and lower level
marks in the inspection window.
If required, remove the oil filler cap ( )
and add the specified oil (page ) up to
the upper level mark. Do not overfill.
Reinstall the oil filler cap. Check for oil
leaks.
3.
2.
1.
4.
5.
(3)
(4)
3
21
4
95
(2)
(1)
(1) Upper level mark
(2) Lower level mark
(3) Inspection window
(4) Oil filler cap
ENGINE OIL
Engine Oil Level Check
41
08/08/06 10:02:59 32MCW660_051
www.ClassicCycles.org

Honda VFR800 ABS Specifications

General

Displacement	782 cc
Bore x Stroke	72 mm x 48 mm
Compression Ratio	11.8:1
Fuel System	PGM-FI electronic fuel injection
Transmission	6-speed
Final Drive	Chain
Wheelbase	57.4 inches
Engine Type	Liquid-cooled 4-stroke 16-valve DOHC 90° V-4
Rear Brakes	Single 256mm disc with 2-piston caliper and ABS
Front Tire	120/70ZR-17
Rear Tire	180/55ZR-17