Configuring Camera Settings
43
Configuring Storage Settings
Recording Schedule and Snapshot Schedule
You can add or remove schedules for recording and snapshots. There are three recording modes:
General (auto), Motion, and Alarm. You can configure up to nine recording periods per day.
Note
Ensure that you have enabled the corresponding recording mode in
SetupStorageConditions.
Alarm recording mode is only supported by the following models:
H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/HEW4PR2/
H4W2PRV2/H4W4PRV2.
Figure 5-24 Recording Schedule Configuration Interface
Recording Schedule Color Codes
• Green: General recording/snapshot
• Yellow: Motion detection recording/snapshot
• Red: Alarm recording/snapshot
Setting Holidays
You can set specific days as holidays for which the recording schedule is different. When enabled, the
selected/configured dates will record according to the holiday setup.
To Next Page
Loading...
Need help?
General