Performance Series IP Camera Software Configuration Guide
62
Table 6-4 Alarm Configurations
Type Parameter Function
Alarm Type
Motion Detection System alarms when a motion detection event occurs.
Tampering
System alarms when the camera has been tampered
with.
Disk Full
System alarms when the disk (microSD card) is full.
Note This function is only supported by the following models:
H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/
HEW4PR2/H4W2PRV2/ H4W4PRV2.
Disk Error
System records alarm information when a microSD card
error occurs.
Note This function is only supported by the following models:
H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/
HEW4PR2/H4W2PRV2/H4W4PRV2.
Illegal Access
System alarms when someone attempts to illegally
access the camera.
Operation Prompt System displays an alarm dialog box.
Alarm Tone
Play Alarm Tone
When an alarm occurs, the system automatically generates
an audible sound. You can select a tone from your PC for the
alarm tone prompt.
Tone Path Select the alarm sound file.
To Next Page
Loading...
Need help?
General