Honeywell HBW2PR2 User Manual

Configuring Camera Settings
47
Table 5-20 Record Control Configurations
Parameter Function
Pack Duration Select the file size. The default is 8 minutes.
Pre-event Record
Enter a pre-record value.
For example, if you enter 4, the system can record the four seconds of video in
the buffer. Recording begins five seconds before the event trigger.
Disk Full
Select Stop Recording or Overwrite the previous files when the HDD is full.
Overwrite: If the current working HDD is full, then the system will overwrite the
previous file.
Stop: If the current working HDD is full or is overwriting, the system will stop
recording.
Record Mode Select Auto, Manual, or Off.
Record Stream Select Main Stream, Sub Stream 1 or Sub Stream 2.
Configuring System Settings
General System Setup
The general interface includes the local host setup (including the camera name and GUI language) and
the date/time setup.
General
Figure 5-31 General System Configuration Interface
Table 5-21 General System Configurations
Parameter Function
Device Name Enter the camera’s name.
Language Select a language from the drop-down list.
Video Standard Select the video standard: NTSC or PAL.

Honeywell HBW2PR2 Specifications

General

Brand	Honeywell
Model	HBW2PR2
Category	IP Camera
Language	English