-.
-.-.
-.
',)&'
Arming in Stay Mode
7 & * @ 0 & "
&&&&*! *8&& &
& & 9 & !< &@ & &
&&&@ ) * H)
* &*&& *@ &
&&
'*& @&&
& ! & & & @
)
' = * % 5 *& * @ &
*%&CD&& &
&! *%AE&
The Guest Code and Installer Code cannot disarm the system unless it was used to arm the
system. In addition, if the system is armed by pressing via Quick-Arming, neither the Guest Code
nor Installer Code can disarm the system.
Ready To Arm
5200-100-014-V0
Arm Away
Delay
Phone
More
Message
System
Arm Stay
10:18 AM June 8, 2010
Zones
1. Select the Arm Stay icon, the system beeps once and
displays a keypad.
Ready To Arm
Arm the system in Stay mode
Enter Code:
Cancel Quick Arm
231
564
0
897
Clear
5200-100-015-V0
2. Enter a valid User Code.
OR
If Quick Arm has been enabled, select the “Quick Arm” icon.
Note: If a valid user code is not entered or the Confirm icon has
not been selected within 10 seconds, the system returns to
the “security” screen and it will not be armed.
Armed Stay - Exit Now
Exit now
28 seconds
5200-100-016-V0
Phone
More
Message
Zones
Disarm Restart
10:18 AM June 8, 2010
System
3. The system beeps three times and announces “Armed Stay
Exit Now”. The exit delay screen is displayed. If programmed
the display counts down the time remaining in the exit delay.
To Next Page
Loading...
Need help?
General
