-.
-.-.
-.
',)&'
Arming In Away Mode
7 & * "&&&&
*! *8&& & &&9
& 9< &@ & & & & &@
)&&& @ &&&)&<) *
&*&&&* 0&& *<B *
&@ & & &
'
*& @&& & !
&&& @ )'=*%5
*&*@ & *%&CD
&& & &! *%AE
& ' * &@ !<&
.0
!0&0 &8&&
The Guest Code and Installer Code cannot disarm the system unless it was used to arm the system. In addition,
if the system is armed by pressing via Quick-Arming, neither the Guest Code nor Installer Code can disarm the
system.
Ready To Arm
5200-100-014-V0
Arm Away
Delay
Phone
More
Message
System
Arm Stay
10:18 AM June 8, 2010
Zones
1. Select the Arm Away icon, the system beeps once and
displays a keypad.
Ready To Arm
Arm the system in Away
mode
Enter Code:
231
564
0
897
Clear
5200-100-120-V0
Cancel Quick Arm
2. Enter a valid User Code.
OR
If Quick Arm has been enabled, select the “Quick Arm” icon.
The system beeps two times and announces “Armed Away
Exit Now. The exit delay screen is displayed. If programmed
the display counts down the time remaining in the exit delay
in seconds.
Note: If a valid user code is not entered or the Confirm icon has not
been selected within 10 seconds, the system will return to the
“security” screen and it will not be armed.
5200-100-019-V0
Armed Away - Exit Now
Exit now
28 seconds
Disarm Restart
Phone
More
Message
Zones
10:18 AM June 8, 2010
System
3. If “Exit Warning” has been enabled, the system will continue
to beep throughout the exit delay. Rapid beeps will sound
for the final 10 seconds of the delay period.
To Next Page
Loading...
Need help?
General
