Honeywell LYNX Touch Security System User Manual

– 29 –
SECURING THE PREMISES
SECURING THE PREMISESSECURING THE PREMISES
SECURING THE PREMISES
Bypassing Protection Zones
Displaying/Clearing Bypassed Zones
Ready To Arm - Bypass
5000-100-210-V0
Arm Away
Delay
Phone
More
Automation
Message
Zones
Arm Stay
72
10:18 AM June 8, 2010
Ready To Arm - Bypass
5100-100-089-V0
99. Police
95. Fire
96. Medical
2. Front
Door
Select
All
READY
BYPASSED
READY
READY
3. Garage
Door
READY
Bypass All
Faulted
Bypass
Clear
Bypasses
1. With the system in the disarmed state,
select the “Zones” icon. The system displays
the Zone screen and the status for each
zone will be indicated.
2. Use the “S” “T” buttons to scroll to
additional pages and view the zone status.
3. If you select the “Select All” button it scrolls
through the following: “Select All”, “Select
Alarm”, “Select Trouble” and “Select Fault”.
The system displays the associated zones.
Note: If one or more zones has been
bypassed the “Clear Bypasses” button
will be highlighted.
Ready To Arm - Bypass
5100-100-090-V0
99. Police
95. Fire
96. Medical
2. Front
Door
Select
All
READY
BYPASSED
READY
READY
3. Garage
Door
READY
Bypass All
Faulted
Bypass
Clear
Bypasses
4. To clear the bypass, select the zone(s) that
are bypassed, then select the “Clear
Bypasses” button.
5. Enter a valid code on the displayed keypad.
The system returns to the Zones screen.
6. Select the 2 icon to return to the home
screen.

Honeywell LYNX Touch Security System Specifications

General

Brand	Honeywell
Model	LYNX Touch Security System
Category	Security System
Language	English