Honeywell NOTIFIER UDACT-2 User Manual

12 UDACT-2 — Instruction Manual P/N 54089:B3 10/29/2019
Overview Board Layout
3 TEST REPORT Press and hold this button switch down for over 3 seconds to have the UDACT-2 transmit a test message to both
Central Stations. The message reported is the same as the automatic test message for all formats except
Ademco Contact ID.
4 RESET Press this button switch down for a hardware reset.
Switch # Switch Name Description
Table 1.4 Switches (2 of 2)

Honeywell NOTIFIER UDACT-2 Specifications

General

Brand	Honeywell
Model	NOTIFIER UDACT-2
Category	Transmitter
Language	English