Honeywell VISTA-20PSeries User Manual

– 57 –
System Features Log
(cont’d
)
User Setup (cont’d)
Enter system/partition master code + [8] + user no. + “#” command listed in column heading.
User
No.
*
User
Name
User’s Part(s).
(system master only)
[#] [3] + part(s) + [#]
Security
Code
enter new code
Auth.
Level
[#] [1] + level
Access
Group
[#] [2] + group
RF Zone
Number
[#] [4] + zone no.
Pager
on/off
[#] [5] + 0/1
33 partition 2 master (2) (4) (1)
34 (2) (0) (1)
35 (2) (0) (1)
36 (2) (0) (1)
37 (2) (0) (1)
38 (2) (0) (1)
39 (2) (0) (1)
40 (2) (0) (1)
41 (2) (0) (1)
42 (2) (0) (1)
43 (2) (0) (1)
44 (2) (0) (1)
45 (2) (0) (1)
46 (2) (0) (1)
47 (2) (0) (1)
48 (2) (0) (1)
49 (2) (0) (1)
Authority Levels: 0 = standard user Partitions: 0 = clears partition 1 and partition 2 defaults
1 = arm only 1 = partition 1 and common
2 = guest 2 = partition 2 and common
3 = duress 3 = common partition only
4 = partition master Paging: 0 = no paging
1 = allow paging
* Users 34-49 apply to VISTA-20P/PS Series only; user 33 is partition 2 master for VISTA-20P/PS Series, and the last
user for VISTA-15P Series.
Paging Setup
Automatically Reports Upon… Sched. Func. Key
open/close alarm/trouble zone list
Pager
Pager Phone Number\
Prefix Characters
p1 p2 p1 p2 p1 p2
1
2
3
**
4
**
** Pagers 3 and 4 and partitions apply to VISTA-20P/PS Series only.

Honeywell VISTA-20PSeries Specifications

General

Brand	Honeywell
Model	VISTA-20PSeries
Category	Security System
Language	English