HP 17-cn0 Series User Manual

Table 5-7 Fingerprint reader description and part number (continued)
Description Spare part number
Fingerprint reader, underwater teal M59357-001
Fingerprint reader cable M50424-001
Before removing the ngerprint reader, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 32).
2. Remove the bottom cover (see Bottom cover and rubber feet on page 32).
3. Remove the battery (see Battery on page 34).
4. Remove the hard drive (see Hard drive on page 39).
Remove the ngerprint reader:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the ngerprint reader bracket to the computer,
and then remove the bracket (2).
2. Disconnect the cable from the ZIF connector on the ngerprint reader board (3).
3. Remove the ngerprint reader from the computer (4).
Reverse this procedure to install the ngerprint reader.
USB board
To remove the USB board, use this procedure and illustration.
Table 5-8 USB board description and part number
Description Spare part number
USB board M50413-001
USB board cable M50422-001
Component replacement procedures 41

HP 17-cn0 Series Specifications

General

Brand	HP
Model	17-cn0 Series
Category	Laptop
Language	English