HP 17-cn0 Series User Manual

Fan
To remove the fan, use this procedure and illustration.
Table 5-10 Fan description and part number
Description Spare part number
Fan for use in models with UMA graphics memory M50402-001
Fan assembly for use in models with discrete graphics memory M50438-001
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 32).
2. Remove the bottom cover (see Bottom cover and rubber feet on page 32).
3. Remove the battery (see Battery on page 34).
Remove the fan assembly:
1. UMA models: Remove the three Phillips M2.0 × 4.0 screws (1) that secure the fan to the computer.
2. Disconnect the fan cable from the system board (2), and then remove the fan from the computer (3).
44 Chapter 5 Removal and replacement procedures for authorized service provider parts

HP 17-cn0 Series Specifications

General

Brand	HP
Model	17-cn0 Series
Category	Laptop
Language	English