EasyManuals Logo
Home>HP>Switch>1810-24G

HP 1810-24G User Manual

HP 1810-24G
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Table 26 VLAN Configuration Fields (continued)
DescriptionField
The current number of VLANs. Up to 64 VLANs can be created.Number of VLANs
After the VLAN ID has been created using the previously described fields, you can apply
a name to it or delete it.
VLAN Name
Delete VLAN
To delete a VLAN, select Delete VLAN and click Apply. The default VLAN cannot be
deleted.
Set Name
To specify a VLAN name, select Set Name, type a name in the VLAN Name field,
and click Apply. A VLAN name can have up to 32 alphanumeric characters, including
spaces.
Click Apply to save any changes for the currently selected VLAN. The changes take effect
immediately.
VLAN Ports
Use the VLAN Ports page to view the Port VLAN ID that a port will assign to untagged frames that
it forwards, and to configure the port priority.
To display the VLAN Ports page, click VLANs > VLAN Ports in the navigation pane.
Figure 34 VLAN Ports Page
Table 27 VLAN Configuration Fields
DescriptionField
Select the port on which to configure the VLAN settings.Interface
The VLAN ID that this port will assign to untagged frames or priority-tagged frames
received on this port (range 1–4094, default = 1). The PVID is not user-configurable
PVID
and always corresponds to VLAN ID of the port’s untagged VLAN membership. You
assign ports to VLANs on the VLAN Participation / Tagging page.
The PVID value displays as None if all the VLANs are configured as tagged on this port
or if this port is configured as the destination port in a port mirroring configuration.
Specify the default 802.1p priority assigned to untagged packets arriving at the port.
A value of 0 indicates the lowest priority, commonly used for routine traffic, and 7
Port Priority
indicates the highest priority, often reserved for application such as voice and video.
(0–7, default = 0)
NOTE: Ingress Filtering is enabled on all ports; therefore, a frame is discarded if the port is not
a member of the VLAN that the frame is associated with. In a tagged frame, the VLAN is identified
by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified for the
port that received this frame.
Click Apply to save any changes for the current boot session; the changes take effect immediately.
48 Virtual LAN

Table of Contents

Other manuals for HP 1810-24G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 1810-24G and is the answer not in the manual?

HP 1810-24G Specifications

General IconGeneral
BrandHP
Model1810-24G
CategorySwitch
LanguageEnglish

Related product manuals