Replacing the Power Supply Unit
68
7 Remove the 5 screws from the casing of the power supply unit and
remove the power supply from its casing.
8 Remove the airflow guide (if fitted).
9 Place the new power supply unit in its casing, attach the five screws and
fit the airflow guide as shown here (if there is one).
10 Place the new power supply unit inside the computer, taking care not to
snag any cables.
11 Reconnect all the power cables to the drives and the system board.
12 Secure the cables inside the cable clamp
13 Replace the cover. Refer to page 54.
14 Check that the voltage switch is set correctly for your country.
To Next Page
Loading...
Need help?
General