Clearing Your PC’s CMOS (BIOS) Settings
74
Clearing Your PC’s CMOS (BIOS) Settings
CMOS is a chip that keeps a record of installed components when your PC
is turned off. Clearing CMOS settings may help you resolve some common
problems. For example:
• when you need to clear passwords to have full access to your PC’s BIOS
Setup program
• when your PC cannot detect an expansion card or other device
• when you are having problems booting the PC.
You can clear CMOS settings:
• by using your PC’s BIOS Setup program
• by opening your PC and clearing CMOS manually.
Clearing CMOS Using the Setup Program
If you are able to gain access to your PC’s Setup program, use the
following simple method to clear CMOS settings:
1 Restart your PC and press F2 when the message
Press F2 to enter Setup
appears on screen. Refer to page 72.
2 From within the Setup program, press F9 to load Setup defaults.
3 Press F10 to exit Setup saving changes.
Manually Clearing CMOS and Passwords
You should clear CMOS manually when you cannot gain access to the PC’s
Setup program.
To clear CMOS and Passwords:
1 Remove the PC’s main cover. Refer to page 49.
Switch block
To Next Page
Loading...
Need help?
General