To Next Page

To Previous Page

Removal and replacement procedures 4–5

8. Connect AC power to the computer. Do not reinsert any batteries at this time.

9. Turn on the computer.

All passwords and all CMOS settings have been cleared.

Component replacement procedures

This chapter provides removal and replacement procedures.

There are as many as 71 screws, in 14 different sizes, that must be removed, replaced, or loosened when servicing

the computer. Make special note of each screw size and location during removal and replacement.

Serial number

When ordering parts or requesting information, provide the computer serial number and model description

provided on the service tag.

Item Component Description

1 Product name This is the product name affixed to the front of the computer.

2 Serial number (s/n) This is an alphanumeric identifier that is unique to each product.

3 Part number/Product number (p/n) This number provides specific information about the product's

hardware components. The part number helps a service

technician to determine what components and parts are needed.

4 Model description This is the number used to locate documents, drivers, and

support for the computer.

5 Warranty period This number describes the duration of the warranty period for the

computer.

Other manuals for HP Compaq 2230s

Questions and Answers:

Need help?

Do you have a question about the HP Compaq 2230s and is the answer not in the manual?

General