Hardware Reference Guide www.hp.com 2–5
Hardware Upgrades
Removing the Front Bezel
1. If you have locked the Smart Cover Lock, see the “Smart Cover
Lock” section or use Computer Setup to unlock it.
2. Turn off the computer properly through the operating system and
turn off any external devices. Disconnect the power cord from the
power outlet and disconnect any external devices.
3. Remove the computer access panel.
4. Push up on the two release tabs 1, then rotate the front bezel
away from the chassis to release it 2.
Removing the Front Bezel
✎
When replacing the front bezel, ensure that the bottom hinge points
are properly placed in the chassis before rotating the front bezel back
into its original position.
To Next Page
Loading...
Need help?
General