omnidbva
queries the ZDB database (VADB) and administers the VA LUN exclude file, instant
recovery and password information
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omnidbva
SYNOPSIS
omnidbva -version | -help
omnidbva -exclude {-put filename | -get filename | -check VA_wwn
LUN | -init | -delete}
omnidbva -init [-force]
omnidbva -delete session_id [-force]
omnidbva {-session [session_id] | -lun [LUN]}
omnidbva -vapasswd VA_wwn password
omnidbva -sampasswd SAM_server_ID user password
omnidbva -dbcheck [-force]
DESCRIPTION
The omnidbva command can be used to manipulate the VADB, which is situated
on the Data Protector Cell Manager. VADB contains configuration information required
for LUN security, instant recovery sessions and security passwords that affect the
operation of the HP StorageWorks Virtual Array integration.
LUN security information is contained in the VA LUN exclude file. The VA LUN exclude
file is used to specify LUNs, within HP StorageWorks Virtual Arrays connected to a
Data Protector cell, that are to be excluded from Data Protector operations. The file
contains a list of such LUNs grouped according to the world-wide-name of the Virtual
Arrays concerned. LUNs specified in the VA LUN exclude file in this way cannot be
accessed by Data Protector for backup and restore purposes and can safely be
reserved for other purposes.
The VA LUN exclude file is located on the Cell Manager as follows:
Data_Protector_program_data\db40\vadb\exclude (Windows Server
2008), Data_Protector_home\db40\vadb\exclude (other Windows systems),
or /var/opt/omni/server/db40/vadb/exclude (UNIX systems).
Other LUN and session information is contained in the VADB, which is also within
VADB.
Command line interface reference 121
To Next Page
Loading...
Need help?
General