omnisrdupdate
updates the System Recovery Data (SRD) file
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omnisrdupdate
SYNOPSIS
omnisrdupdate -version | -help
omnisrdupdate [-session sessionID] [-cell name]
[-host ClientName] [ -location path1 [-location path2 ...]]
[-asr]
DESCRIPTION
The omnisrdupdate command is used to update System Recovery Data (SRD). An
SRD file, which is a text file in the Unicode (UTF-16) format, is generated during
CONFIGURATION backup of a Windows system, and saved to the Cell Manager to
the directory Data_Protector_program_data\Config\Server\dr\srd
(Windows Server 2008), Data_Protector_home\Config\Server\dr\srd
(other Windows systems), or /etc/opt/omni/server/dr/srd/ (UNIX systems).
The SRD filename is identical to the hostname of the system where it was generated,
for example computer.company.com. After the CONFIGURATION backup, the
SRD contains only the system information required for system configuration and
installation of the operating system needed for disaster recovery. To be able to perform
a disaster recovery without a working Data Protector internal database (IDB),
additional information about backup objects and corresponding media must be
added to the SRD by running this command. The name of the updated SRD file is
recovery.srd.
OPTIONS
-version
Displays the version of the omnisrdupdate command.
-help
Displays the usage synopsis for the omnisrdupdate command.
-session sessionID
Command line interface reference 383
To Next Page
Loading...
Need help?
General