omnimnt
responds to a Data Protector mount requests for a medium
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omnimnt
SYNOPSIS
omnimnt -version | -help
omnimnt -device BackupDevice -session SessionID [-cancel]
DESCRIPTION
The omnimnt command satisfies or aborts a Data Protector mount request. A mount
request is issued by a backup device once it has filled all the available media. A
mount request is a prompt to mount a new medium. Once the requested medium is
inserted in the device drive, the omnimnt command should be used to confirm that
the correct medium is inserted. The mount request can also be canceled which is
done by canceling device. If you cancel device, all data objects associated with the
backup device that issued the mount request will not be processed any further. To
view information on currently active sessions, use the omnistat command.
OPTIONS
-version
Displays the version of the omnimnt command
-help
Displays the usage synopsis for the omnimnt command
-cancel
Cancels the device. This will terminate processing of all objects that are associated
with the backup device which issued the request.
-device BackupDevice
References the backup device BackupDevice which issued the mount request,
in order to confirm mount request or cancel the device.
-session SessionID
Specifies the session using the backup device which issued the mount request.
Command line interface reference 167
To Next Page
Loading...
Need help?
General