Displays detailed information about the selected query.
NOTES
For the -header option, the following limitation applies: the command displays the
header information stored on the medium, ignoring possible updates in the Data
Protector internal database (IDB).
EXAMPLES
The following examples show how the omnimlist command works.
1. To list sessions and corresponding disk agents from device "DAT2", run:
omnimlist -device DAT2 -monitor
2. To list sessions on slot "43" side "B" of a tape library unit "MO_Changer", run:
omnimlist -device MO_Changer -slot 43 B -session
3. To list all disk agents for the session "2007/07/13-23" on the device
"Exa8500", run:
omnimlist -device Exa8500 -session 2007/07/13-23
4. To list the catalog for the object-session combination with the DiskAgentID
"774226832", from the medium located in slot "7" of device "Herstal2", run:
omnimlist -device Herstal2 -slot 7 -catalog 774226832
5. To display media header for the medium in the backup device named "dev_1",
run:
omnimlist -device dev_1 -header
SEE ALSO
omniamo(1), omnidownload(1), omnimcopy(1), omniminit(1), omnimm(1), omnimnt(1),
omnimver(1), omniupload(1), sanconf(1M), uma(1M)
Command line interface reference 153
To Next Page
Loading...
Need help?
General