HP Data Protector A.06.11 Command Line Interface Guide

InstallPath
Specifies the path for installation — the Data Protector home directory. The
parameter must be enclosed in double quotes. For UNIX remote client installation
this path is ignored and a placeholder ("-") can be used.
UserName
Specifies the user name that is used during the remote client installation. If not
specified, the default value "root" is used. The user name must be enclosed in
double quotes. If you perform remote installation using secure shell, use a
placeholder ("-").
Password
Specifies the password that is used while the Installation Server connects to the
client. If you do not provide a password (in such a case, you must use "-"), you
will have to provide it later during installation. The password must be enclosed
in double quotes. If you perform remote installation using secure shell, leave this
parameter empty.
CellManagerName
Specifies the name of the client's Cell Manager. It must be enclosed in double
quotes.
GeneralInstallationType
General installation type can have two values: 1 or 2. 2 specifies a client
installation. 1 is reserved for future extensions. For Data Protector A.06.11 release
only the client installation is supported.
InstallationType
Specifies installation type:
1 new installation
2 update
3 delete
4 check installation
NOTES
The ob2install command is available on UNIX systems only.
EXAMPLES
The following example illustrates how the ob2install command works.
Command line interface reference 291

HP Data Protector A.06.11 Specifications

General

Brand	HP
Model	Data Protector A.06.11
Category	Software
Language	English