If specified, the ASR archive file (a collection of files required for proper
reconfiguration of the replacement disk packed in a single archive file) is
downloaded from the Cell Manager and ASR files are extracted and stored to
all destinations, specified by the -location option. At least one -location
option must be specified otherwise the -asr option is ignored. If the ASR archive
file on the Cell Manager does not exist, omnisrdupdate fails and the SRD file
is not updated.
NOTES
The omnisrdupdate command is available on Windows systems only.
EXAMPLES
1. To update the SRD file with the backup object information belonging to the
session "2008/03/02-5", run:
omnisrdupdate -session 2008/03/02-5
To obtain the session ID, execute the omnidb command with the option
-session. To obtain the latest session ID, run:
omnidb -session -latest
2. To update the SRD file with the backup object information which belongs to the
session "2008/03/02-5" and save the updated SRD file on a diskette as well
as to the network share "srdfiles" on the system with the hostname "computer",
run:
omnisrdupdate -session 2008/03/02-5 -location A: -location
//computer/srdfiles
3. To update the first diskette from the ASR set with the backup object information
and ASR files which belong to the session "2008/03/02-5", ensure the first
diskette is not write-protected, insert it into the floppy disk drive, and run:
omnisrdupdate -session 2008/03/02-5 -location A: -asr
SEE ALSO
omnidr(1M), omniiso(1), omniofflr(1M)
Command line interface reference 385
To Next Page
Loading...
Need help?
General