EXAMPLES
The following environment is used to illustrate the examples:
Datacenter: /Mydatacenters/Datacenter1
VirtualCenter Server
system:
virtualcenter2.company.com
Username: Administrator
Password: vmfdjkljy8767
Backup proxy: proxy2.company.com
Virtual machines: /vm/myfolder/myvm1, /vm/myfolder/myvm2
1. To specify Standard security for connection to the VirtualCenter Server system,
log in to the VirtualCenter Server system and run:
util_vmware.exe –config –security 0 —username Administrator
—password vmfdjkljy8767
2. To configure the virtual machine /vm/myfolder/myvm1 to use the Single
snapshot handling mode for Snapshot backup sessions and the backup proxy
proxy2.company.com for VCBfile and VBCimage backup sessions, log in to
the VirtualCenter Server system and run:
util_vmware.exe –config –instance
/Mydatacenters/Datacenter1 –vm /vm/myfolder/myvm1
–snapshots 1 –proxy proxy2.company.com
3. To specify Integrated security for connection to the VirtualCenter Server system
and to configure both virtual machines to use the default snapshot handling
mode, backup proxy, and mount point, log in to the VirtualCenter Server system
and run:
util_vmware.exe –config -security 1 —instance
/Mydatacenters/Datacenter1 –vm /vm/myfolder/myvm1 —default
–vm /vm/myfolder/myvm2 —default
430
To Next Page
Need help?
General