4. Install the rack front door.
5. Insert a T-25 Torx screw through the other end of the same grounding strap, and insert the screw in the hole on the rack
front door. Tighten the screw.
Attaching the grounding straps to the front door with a grounding lug
Procedure
1.
Insert a T-25 Torx screw through the other grounding strap end and secure it to the front door.
2.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the front door and tighten the
washer.
Ground Bonding kit
36
To Next Page
Loading...
Need help?
General
