Managing Your Spooler Jobs Using Peruse
Guardian User’s Guide—425266-001
13-11
Finding TAL Errors
Use the LIST LAST (or LL) command to display the last page of the listing, which is
the TAL trailer message. This message indicates that no warning or error messages were
generated during the compilation:
To print this job, use the LOC command to send it to a location associated with an actual
printer. When your job prints, Peruse displays the status as PRINT:
_LIST LAST
Object file name is $VOL1.ADMIN.PROG
This object file will run on either a TNS or a TNS/II system
Number of errors = 0
Number of warnings = 0
Primary global storage = 44
Secondary global storage = 1120
Code size = 1888
Data area size = 40 pages
Code area size = 2 pages
Maximum symbol table space available = 24892, used = 4064
Maximum extended symbol table space available = 0, used = 0
Number of source lines = 3224
Elapsed time - 00:11:05
_LOC #LP; JOB
JOB BATCH STATE PAGES COPIES PRI HOLD LOCATION REPORT
136 PRINT 130 1 4 #LP TAL USER
_EXIT
To Next Page
Loading...
Need help?
General