Preparing for installation
The HP MSR1000 Router Series includes the models in Table 1.
Table 1 HP MSR1000 Router Series models
Router model Product code HP description RMN
MSR1002-4 JG875A HP MSR1002-4 Router BJNGA-BB0034
MSR1003-8 JG732A HP MSR1003-8 Router BJNGA-BB0029
MSR1003-8S JH060A HP MSR1003-8S Router BJNGA-BB0029
IMPORTANT:
For regulatory identification purposes, every MSR1000 router is assigned a regulatory model number
(RMN). These regulatory model numbers should not be confused with the marketing name HP MSR100X or
the product code.
Safety recommendations
Safety symbols
When reading this document, note the following symbols:
WARNING means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
• Keep the chassis and installation tools away from walk areas.
• Make sure the ground is dry and flat and anti-slip measures are in place.
• Unplug all the external cables (including the power cord) before moving the chassis.
Electricity safety
• Locate the emergency power-off switch in the room before installation. Shut the power off at once in
case accident occurs. Disconnect the power cord of the router if necessary.
• Make sure the router is reliably grounded.
• Do not open or close the chassis cover when the router is powered on.
1
To Next Page
Loading...
Need help?
General
