111
Managing batteries
Safety precautions for recharging
NiMH batteries
• Do not charge any batteries other than NiMH batteries in
the quick recharger.
• Insert the NiMH batteries in the correct orientation in the
quick recharger.
• Use the quick recharger in a dry location only.
• Do not charge NiMH batteries in a hot location, such as
in direct sunlight or near a fire.
• When recharging NiMH batteries, do not cover the quick
recharger in any way.
• Do not operate the quick recharger if the NiMH batteries
appear damaged in any way.
• Do not disassemble the quick recharger.
• Unplug the quick recharger from the electrical outlet
before cleaning the quick recharger.
Sleep time-out for power
conservation
To conserve battery power, the Image Display turns off
automatically if there is no button activity for 30 seconds.
When the camera is connected to a computer, the Image
Display turns off automatically 10 seconds after the
connection is made. When the camera is in this sleep state,
pressing any button will wake up the camera again. If no
buttons are pressed during the sleep state, the camera will
turn off after an additional 5 minutes.
Downloaded from ManualsCamera.com Manuals
To Next Page
Loading...
Need help?
General
