To Next Page

To Previous Page

HP Photosmart E327 User Guide

Setup

To locate a part on your camera (such as a button or a light)

while following the instructions in this section, see Camera

parts on page 14.

1. Install the batteries

1. Open the Battery/Memory card door on

the side of the camera by sliding the

door toward the front of the camera.

2. Insert the batteries as indicated inside

the door.

3. Close the Battery/Memory card door by

pushing the door down and sliding the

door toward the back of the camera until

the door latches.

For the performance of NiMH, Lithium, and

Alkaline batteries when used with this camera, see

Performance per battery type on page 106. For the number

of shots you can expect to get for each battery type based

on usage, see Number of shots per battery type on

page 107. For hints on optimizing battery performance, see

Appendix A, Managing batteries, starting on page 103.

TIP: If you use rechargeable NiMH batteries, you can

recharge the batteries in the optional HP Photosmart

quick recharger. For more information, see Appendix B,

Purchasing camera accessories, starting on page 113.

Downloaded from ManualsCamera.com Manuals

HP Photosmart E327 User Manual

Other manuals for HP Photosmart E327